Product: ACARDASH Racing Design Carbon Fiber Steering Wheel with Modern Controls
Step-by-Step Installation Guide
Step 1: Remove the Airbag
-
Locate the airbag release holes on the back of the original steering wheel.
-
Insert a flat-head screwdriver into each hole and gently push the airbag clips inward to release it.
-
Carefully lift the airbag unit away from the steering wheel and disconnect its electrical plug.
Step 2: Remove the Steering Wheel
-
Use a 24mm socket to loosen and remove the central bolt securing the steering wheel.
-
Gently pull the steering wheel toward you to detach it from the steering column.
Step 3: Install the New Carbon Fiber Steering Wheel
-
Align the new ACARDASH steering wheel with the steering column splines.
-
Secure it by tightening the central bolt with the 24mm socket.
Step 4: Reconnect Electrical Components
-
Plug the original vehicle’s wiring harness into the corresponding port on the new steering wheel.
-
For the airbag: Connect the blue and green plugs to the new airbag unit.
Step 5: Connect the OBD Module
-
Locate the OBD port in your vehicle (usually under the dashboard).
-
Plug the included OBD module into the port to ensure compatibility with modern controls (e.g., paddle shifters or multimedia buttons).
Step 6: Test and Finalize
-
Reconnect the vehicle’s battery.
-
Start the car and verify all controls (horn, airbag light, buttons) function properly.
-
Ensure the steering wheel is firmly secured before driving.
❗ Troubleshooting
-
Airbag light on? Use an OBD scanner to reset the system.
-
Buttons not working? Double-check OBD module connections.
-
Need help? Contact ACARDASH Support.
Upgrade Your Drive Today
🛒 Buy Now