STEP 1. REMOVE THE KNOBS ON BOTH SIDES WITH THE WARPING BOARD
RIGHT SIDES REMOVE KNOBS AS SHOWN LEFT
STEP 2: REMOVE THE SCREW END MARKED IN RED
STEP 3: REMOVE THE MAIN DRIVER SIDE BAFFLE
STEP 4 : REMOVE THE PASSENGER SIDE BAFFLE WITH SCREWS INSIDE
STEP 5: REMOVE THE SCREWS INSIDE THE SIDE BAFFLE
STEP 6 : REMOVE THE SCREW COVER FROM THE HANDLE POSITION
STEP 7 : REMOVE THE SCREWS AND REMOV THE GEAR HANDEL
STEP 8 : TAKE OUT THE Original Head Unit
STEP9 : THE WIRING HARNESS DOCKING, PROCESSING PERFEC
THE EFFECT OF AFTER INSTALLION
Note:
1. Our installation needs to be done by professionals or under the guidance of professionals.
2. Do not operate with power on during disassembly and assembly to prevent burning of the screen.
3. Complete the final installation after testing that all functions are normal.
4. Even if the guidance hotline
demi@acarmutimedia.com +8619974338340
milo@acarmultimeida.com +861835858162